YOP-GR1000
Greencase Outside Release
Function
– Enables trapped air between greencase and mold to escape quickly during vulcanization
– Helps a cured tire to release better from mold
– Colorless solution allows a scanner to read the barcode on the tires
Advantages
– YOP-GR1000 does not contaminate the mold as much as other similar products
– YOP-GR1000 does not contain hazardous material
– YOP-GR1000 helps to maintain vivid color of tread lines after spraying
– YOP-GR1000 will not contaminate the barcode
Storage
– Keep the product at a well-ventilated area
– Store away from heat and moisture
– Keep away from sparks and flames
Shelf life
– 3months
| Identification | YOP-GR1000 | Test Method |
| Appearance | Black emulsion | – |
| Specific Gravity (25°C) | 1.10 ± 0.05 | ASTM D 1963 |
| pH | 10.0 ± 1.0 | ASTM D 87 |
| Solid contents (%) | 10.0 ± 3.0 | ASTM D 2974 |
| Viscosity (Sec.) | 8.00 ± 1.0 | Zahn Cup #3 |
| Ash (%) | 0.5 ± 0.5 | ASTM D 2974 |
| Application | Greencase outside paint | – |
DIPSON-530
Anti-Adhesive for Uncured Compound (Powder)
Function
– Forms a thin layer of coating to prevent rubber compound from adhesion
– Sludge is minimized, therefore frequency of regular cleaning may be reduced
Advantages
– Does not affect adhesiveness where needed
– Thoroughly spreads and coats the compound
– During use, dilution can easily be altered
– Does not form foams and dusts
Storage
– Keep the product at a well-ventilated area
– Store away from heat and moisture
– Keep away from sparks and flames
– Avoid oxidizing and reducing agents
Shelf life
– 12months
| Identification | DIPSON-530 | Test Method |
| Appearance | Yellow gray powder | – |
| Specific Gravity (25°C) | 1.5 ± 0.3 | ASTM D 1963 |
| Heat Loss (%) | Max. 10.0 | ASTM D 2974 |
| Ash (%) | 80.0 ± 5.0 | ASTM D 2974 |
| Application | Anti-adhesive agent | – |
JIP-1000
Greencase Inside Release
Function
– JIP-1000 provides lubrication between inner liner and bladder during vulcanization process
– JIP-1000 helps trapped air between greencase and bladder to escape during vulcanization process
Advantages
– Ready-to-use emulsion-type product formulated with proper viscosity that increases productivity
– JIP-1000 adheres to inner liner and does not transfer to bladder after curing
– JIP-1000 provides evenly coated layer that enhances appearance after curing
– Air permeability reduces defects caused by trapped air
Storage
– Keep the product at a well-ventilated area
– Store away from heat and moisture
– Keep away from sparks and flames
Shelf life
– 3months
| Identification | JIP-1000 | Test Method |
| Appearance | Dark gray liquid | – |
| Specific Gravity (25°C) | 1.2 ± 0.2 | ASTM D 1963 |
| pH | 8.5 ± 1.0 | ASTM D 87 |
| Solid contents (%) | 38.0 ± 3.0 | ASTM D 2974 |
| Ash (%) | 25.0 ± 3.0 | ASTM D 2974 |
| Viscosity (cps) | 950 ± 350 | B.F#4.30rpm |
| Application | Greencase inside paint | – |
GIP-2001
Greencase Inside Release
Function
– Release agent applied on inner side of greencase for better relase from bladder during tire curing process
Advantages
– Less friction between a greencase and a bladder
– Easy flow of trapped air between a greencase and a bladder
– Quicker release from a bladder
Storage
– Avoid direct sunlight and keep in cool place with good ventilation
– Keep away from moisture
– Keep away from heat, fire and sparks
Shelf life
– 2months
| Identification | GIP-2001 | Test Method |
| Appearance | Gray or Black liquid | – |
| Specific Gravity (25°C) | 1.1 ± 0.1 | At 25°C |
| Viscosity (cP) | 950 ± 350 | B.F #4.30rpm |
| pH | 8.5 ± 1.0 | At 25°C |
| Solid contents (%) | 38.0 ± 3.0 | 105°C X 2hrs. |
| Ash (%) | 25.0 ± 3.0 | 550°C X 2hrs. |
YNS-100
Anti-Adhesive for Uncured Compound
Function
– Anti-adhesive applied on sheets of uncured rubber during aging and storage
Advantages
– Does not affect adhesiveness where needed
– Thoroughly spreads and coats the compound
– During use, dilution can easily be altered
– Does not form foams and dusts
– Soluble with water
Storage
– Keep the product at a well-ventilated area
– Store away from heat and moisture
– Keep away from sparks and flames
– Avoid oxidizing and reducing agents
Shelf life
– 2months
| Identification | YNS-100 | Test Method |
| Appearance | White Emulsion | – |
| Solid (%) | 25 ± 3.0 | ASTM D 2974-2.1 |
| Ash (%) | 2.5 ± 0.5 | ASTM D 2974-2.3 |
| Sp.Gr | 0.85 ± 0.15 | ASTM D 1188 |
| pH | 9.0 ± 1.5 | ASTM D 1067 |
YND-301
Anti-Adhesive for Uncured Compound
Function
– Anti-adhesive applied on sheets of uncured rubber during aging and storage
Advantages
– Does not generate dust and keeps work environment clean and dust free
– Minimizes sludge through excellent dispersibility
– Does not affect properties of rubber compound
Storage
– Avoid direct sunlight and keep in cool place with good ventilation
– Keep away from moisture
– Keep away from heat, fire and sparks
Shelf life
– 3months
| Identification | YND-301 | Test Method |
| Appearance | White emulsion | – |
| Specific Gravity (25°C) | 0.95 ± 0.1 | At 25°C |
| pH | 10.0 ± 1.5 | At 25°C |
| Solid contents (%) | 11.5 ± 3.0 | 105°C X 2hrs. |
| Ash (%) | 1.0 ± 0.5 | 550°C X 2hrs. |
YEM-1030/1050/1070
Mold Coating Agent
Function
– Water-based mold release agent applied on mold for better release of cured tire
Advantages
– Applicable to various rubber figuration(all kind of vehicle tire and rubber belt)
– Minimizes build-ups on mold
– Superior tire appearance
– Minimize cleaning cycles of mold
Storage
– Avoid direct sunlight and keep in cool place with good ventilation
– Keep away from moisture
– Keep away from heat, fire and sparks
Shelf life
– 2months
| Identification | YEM-1030 / 1050 / 1070 | Test Method |
| Appearance | White emulsion | – |
| pH | 5.5 / 7.5 / 8.5 | At 25°C |
| Solid contents (%) | max.5.0 | 105°C X 2hrs. |
YBC-K
Bladder Coating Agent
Function
– YBC-K forms a thin film-like coating to work as a lubricant
– YBC-K protects bladder from continuous abrasion from greencases
Advantages
– Prevents the bladder from aging
– Increases life-cycle of bladders
– Film will not chip off and contaminate tires or working area
– Only need to apply once to coat a bladder
– Easy to apply by spraying on a bladder
Storage
– Keep the storage area well ventilated
– Avoid direct sunlight
– Store at room temperature
Shelf life
– 1months
| Identification | YBC-K | Test Method |
| Appearance | Clear emulsion | – |
| Specific Gravity (25°C) | 0.75 ± 0.05 | Zahn cup #3 |
| Solid Conten (%) | 15.0 ± 3.0 | ASTM D 2974 |
| Ash (%) | 7.0 ± 2.0 | ASTM D 2974 |
| Application | Bladder surface protecting agent | – |
YBC-RTV
Primer, Bladder Coating Agent
Function
– Permanent bladder coating agent
Advantages
– Coating cured under room temperature
– A pplied before bladder intallation
– Forms a layer of coating on the Bladder surface for better compatibility with YBR-500
– Coating assists life extension of a bladder by anti-aging
Storage
– Avoid direct sunlight and keep in cool place with good ventilation
– Keep away from moisture
– Keep away from heat, fire and sparks
Shelf life
– 1months
| Identification | YBC-RTV | Test Method |
| Appearance | Yellowish clear emulsion | – |
| Specific Gravity (25°C) | 0.7 ± 0.1 | At 25°C |
| Solid Conten (%) | 14.0 ± 3.0 | 105°C X 2hrs. |
YBR-500
Bladder Release Agent
Function
– Semi-permanent release agent applied on a bladder for better release from a greencase during tire curing process
Advantages
– Coating lasts semi-permanently to cure multiple times until next application
– Quicker release of a bladder from a cured tire
– Better flow of trapped air between a greencase and a bladder
– Does not contain solvent
Storage
– Avoid direct sunlight and keep in cool place with good ventilation
– Keep away from moisture – Keep away from heat, fire and sparks
Shelf life
– 2months
| Identification | YBR-500 | Test Method |
| Appearance | White emulsion | – |
| Specific Gravity (25°C) | 1.0 ± 0.1 | At 25°C |
| pH | 7.0 ± 1.0 | At 25°C |
| Solid contents (%) | 19.0 ± 3.0 | 105°C X 2hrs. |
YRR
Rim Lubricant
Function
– YRR allows effortless placement and displacement of a tire
– YRR is a rim release agent applied on a bead of final product before uniformity test
Advantages
– Does not contaminate tire
– Does not oxidize rim of a tester
Storage
– Keep the storage area well ventilated
– Avoid direct sunlight
– Store at room temperature
Shelf life
– 3months
| Identification | YRR | Test Method |
| Appearance | Clear emulsion | – |
| Specific Gravity (25°C) | 1.02 ± 0.10 | ASTM D 1963 |
| pH | 9.5 ± 1.0 | ASTM D 1067 |
| Application | Lubricates the bead of a tire | – |
